User manual

POSCOPE4 AND MEGA1+ MANUAL
52
www.poscope.com
RECORDER
Analyze button is limited with the amount of RAM memory installed in a workstation where
measurements are taken. To avoid the limits of RAM memory, you can save measurements to an
external file on your disk. Therefore the total amount of measuring samples will be limited with the
total capacity of your hard drive, SSD or USB drive.
To run the recorder module of PoScope 4 software, click the REC icon in the device functions area of
PoScope 4 software.
Standard oscilloscope window opens, offering you record button below to start recording.
REMARK: Record button is visible only if source device is in PIPE MODE. Recording is not possible in
BUFFER MODE.