Instructions

ManualsBrandsJoy-it ManualsBench power supply unitsJoy-it RD6006 Bench PSU (adjustable voltage) 0 - 60 V 0 mA - 6 A remote controlled, programmable, slim type No. of ou

www.joy-it.net

Pascalstr. 8 47506 Neukirchen-Vluyn

LABORATORY POWER SUPPLY

JT-RD6006

1. GENERAL INFORMATION

Dear costumer,

thank you very much for choosing our product.

In following, we will introduce you to what to observe while starting up

and using this product.

Should you encounter any unexpected problems during use, please do

not hesitate to contact us.

The RD6006 is a constant voltage and constant current DC power supply

which can convert voltages down.

It is very easy to handle and the adjustment can either be made by key-

pad or by the encoder of the or even both.

It is easy and quick to store and recall data and the RD6006 is very con-

nectable with a PC or via WIFI with a handheld device in addition that you

can use an App for control. On the 2.4 " colour screen you can read out

many values and additional information.

Summary of content (8 pages)

PAGE 1
LABORATORY POWER SUPPLY JT-RD6006 1. GENERAL INFORMATION Dear costumer, thank you very much for choosing our product. In following, we will introduce you to what to observe while starting up and using this product. Should you encounter any unexpected problems during use, please do not hesitate to contact us. The RD6006 is a constant voltage and constant current DC power supply which can convert voltages down.
PAGE 2
SAFETY INSTRUCTIONS Our product is suitable for up to 70 Volt DC. Working with voltage over 60 V DC is reserved for trained electricians, because of the hazard of an electric shock which may cause serious injuries or death. Non-electricians have to use a voltage source below 60 Volt DC. Power source input interface must be connected to 6-70V constant DC power source. The external sensor cable (as shown on right) must be connected to the external temperature sensor interface.
PAGE 3
2. TECHNICAL SPECIFICATIONS Display Input voltage range 2.
PAGE 4
. DEVICE OVERVIEW 4.1. Front Panel: Rotary Encoder Direction buttons Keypad Screen Confirm button Output switch Power supply output positive terminal Battery charging positive terminal Power button Second function button Quick storage button Current /Overcurrent protection value setting Micro USB Interface Power supply output/ battery charging: negative terminal Voltage/ Overvoltage protection value setting 4.2.
PAGE 5
. MENU INTRODUCTION 1. Operation Menu In the menu operation, the icon in red or cursor is the currently selected menu; the icon in blue is the unselected menu; press ENTER to confirm; press the encoder to cancel or return; press the direction key to move the cursor or switch menu; rotate the encoder to change the setting; the settings will be automatically saved when returning from the menu page.
PAGE 6
4. Data Group Quick Storage and Callout Press 'MEM' +keypad button 1-9, you can store the output voltage value, output current value, over voltage protection value, over current protection value into the corresponding data group (as shown above), then press 'ENTER' to confirm, or press the encoder to cancel. Press 'SHIFT' +keypad button 1-9 to quick call out the saved data (as shown above). Press 'ENTER' to confirm, or press the encoder to cancel. 5.
PAGE 7
be automatically saved. 7. Main Page Style setting You can press 'SHIFT' + 'MENU' to enter the system setting menu, and then press the right button to enter the main page style setting menu as shown above. Press ENTER and then use direction button to set classic style or curve style. The pattern in red is the style be chosen. The classic style is the system default style, and the large font shows the voltage, current and power.
PAGE 8
6. ADDITIONAL INFORMATION PR Our information and take-back obligations according to the Electrical and Electronic Equipment Act (ElektroG) Symbol on electrical and electronic equipment: This crossed-out dustbin means that electrical and electronic appliances do not belong in the household waste. You must return the old appliances to a collection point. Before handing over waste batteries and accumulators that are not enclosed by waste equipment must be separated from it.