Instructions

www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
4. Now mount the power supply into the case. Therefore, you have to
screw it from the bottom of the case with the big silver screws.
5. Srew now the fan controll in the case next to the power supply with
the remaining black screws and connect the fan with the according
connection.
6. The next step is the wiring. You begin to wire the switch. Connect
the brown cable (phase) with the switch and the undermost
connector of the power connection From the switch, you connect
another brown cable to the power connection of the screw terminal
of the power supply (marked as L) so that the switch can control the
power supply. The blue cable should be connected with the power
connection marked as N of the power supply and the middle
connector of the power connection. The yellow green cable is
connected with the upper connector as a fuse with the power
supply (marked as the symbol for grounding).