Manual

DETECTION MODE:

Press the key for the mode you want to switch to. The

currently active mode is shown on the display.

DETECTION:

Place the detector on the object surface and move the

device. As the device approaches the object, the signal

strength scale will automatically increase. The yellow or

red LED will additionally light up.

The wood detection mode detects objects in plaster-

board walls, plywood cladding, wooden floors and

coated wood. Foreign objects cannot be reliably detect-

ed in concrete, mortar, brick, carpets, foil surfaces, metal

surfaces, tiles or glass.

When switching to the foreign object detection mode,

the device must lie still on the surface for approx. 1 - 3

seconds to perform the automatic calibration. The

status of the calibration is shown on the display.