Instructions

www.joy-it.net

Pascalstr. 8 47506 Neukirchen-Vluyn

Preset limit of output current

Preset limit of overvoltage

Preset limit of overcurrent

Preset limit of overload

Preset screen brightness

Preset number of data group

Actual value of output voltage / current

5. USE OF DEVICE

Output voltage and current limitation

Press V/↑ to enter the voltage setting mode. Press the Rotary encoder to

move the cursor to the numeric value you want to change. Turning the knob

clockwise increases the value and counter clockwise decreases the value.

Press V/↑ again to exit. Alternatively, aer 30 seconds of inactivity, the setting

mode will automatically exit. Press A/↓ to set the output current limit in the

same way.

Configuration of data and conservation values

Press SET in the main screen to enter the data settings menu.

Setting the voltage and current limits

Navigate through the menu to go to the U-SET (Voltage) or I-SET

(Voltage Limit) option. Set the Output voltage and/or output current

limitation according to your requirements. You can then use the SET

button to return to the menu options. Press the SET button again to exit

the menu.

Setting the protection values

Navigate through the menu to go to the limit options Option S-OVP

(overvoltage protection), S-OCP (overcurrent protection) or S-OPP

(overpower protection). Use the knob to set the desired value. Press the

SET button to return to the menu options and press the SET button

again to exit. The output is automatically deactivated when one of the

protection value limits is reached.

Attention! These are global limit values and should not be

confused with the preset voltages and currents.

Adjusting the screen brightness

Navigate to the B-LED option to adjust the display brightness.

Turn the Rotary encoder to adjust the brightness from 0 to 5. O defines

the darkest and 5 the brightest setting. Press the SET button to return

to the menu options. Press the SET button again to exit the menu.