Instructions

www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
Editing the chosen data group
To edit the chosen data group press V/↑ or A/↓ to navigate upwards
or downwards through the menu options. Press the rotary switch and
the selected numerical value will be highlighted with the cursor. More
actuations of the rotary switch will lead to scrolling through the
possible characters. Aer the desired value is selected, hold down SET
until the number of the data group is shown on the right side of the
screen. The value of the data will now be saved in the selected data
group. By pressing SET again, you return to the menu. You can leave
the menu by pressing SET.
Status of the selected data group at the starting of the device
You can configure the device to automatically activate the output when
the device is turned on. Navigate to do this in the S-INI option and set
the value to ON to activate the option. Once you have selected the de
sired setting, press and hold the SET button until the
data group number is displayed on the right side of the screen. The data
value is now stored. Press the Set button again to return to the previous
menu. To exit the menu, press the Set button again.
Activating and deactivating the output
You can press the ON/OFF button at any time to activate or deactivate the
output.
Key lock
The keys can be deactivated to avoid unintentional changes. You can hold
the rotary switch longer than 3 seconds to block the keys or to
unlock them again at any time . The status of the key lock is shown with the
lock symbol on the right side of the screen.