Instructions

Editing the chosen data group
To edit the chosen data group press V/↑ or A/↓ to navigate upwards or
downwards through the menu options. Press the rotary switch and the
according numerical value will be highlighted with the cursor. Further
operation of the knob scrolls through the available characters. Aer the
desired value is set, hold down SET until the data group number is shown
on the right side of the screen. The value of the data will now be saved
in the selected data group. Press the Set button again to return to the
previous menu. Repeat the above procedure to change one of the other
numerical values for the selected data group. To exit the menu, press the
Set button again.
Condition of selected data group at the start
You can congure the device that the output activates automatically as
soon as the device is started. Navigate in the menu to option S-INI and set
the value to ON to activate this option. Aer you set the desired settings,
hold down SET until the number of the data group is shown on the right
side of the screen. The data value is now saved. By pressing SET you return
to the menu and you leave the menu by pressing it again.
Activation and deactivation of the output
You can press the ON/OFF button at any time to activate or deactivate the
output.
Key lock
The keys can be deactivated to avoid unintentional changes. Hold the
rotary switch longer than 3 seconds to block the keys or to unlock them
again. The status of the key lock is shown with the lock symbol on the right
side of the screen.