Instructions

4. PANEL & DISPLAY
Aer the rst start, the welcome screen followed by the main screen are
shown. On the main screen, the selected voltage and current values are
displayed. If the outputs are activated, the actual values are additionally
shown. On the right side of the display are symbols and prompts which
represent the status of the system. A detailed description of the screen is in
the following:
Attention! Ensure at all times a suicient ventilation of the
device for the heat dissipation.
The permitted output voltage range is between 6 to 50 V
(DC). Watch at the suicient safety distance and do not ever
exceed the maximal output voltage range. Non-observance can
cause substantial and irrparable damage of your device.
Operate the device only with direct current! The operating of
the device with alternating current can cause deadly electric
shocks and irreparable damages to the device.
1
2
3
4
5
6
voltage settings / arrow up /
M1 data group
data input / extract data from data group /
save data in data group
current settings / arrow down /
M2 data group
1.5“ LCD display
rotary switch / key lock
activate / deactivate output