Data Sheet
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
Published: 17.10.2019
SEN-MOISTURE
Soil Moisture Sensor
MAIN FEATURES
Color of board Black
Compatible with Arduino, Raspberry Pi (with
ADC KY053-Modul) , etc.
Characteristics Analog Sensor
Very long probes
based on soil resistance
measurement
Dimensions 82 x 20 x 10 mm
Items delivered Sensor Sen-Moisture
FURTHER DETAILS
Article No. COM-MOSET
EAN: 4250236819808
Customs Tari No. 8473302000
This SEN-Moisture oers an opti-
mal result with its two long probes
and is suitable for an irrigation sys-
tem, for example.
The soil moisture sensor is easy to
handle. The two big bare pads are
used as probes for the sensor and
serve as a variable resistance. The
more water is in the ground, the
better is the conductivity, this
leads to a lower resistance and a
higher voltage is outputted.
FURTHER SPECIFICATIONS
Voltage supply 3.3 / 5 Volts
Voltage output signal 0 –4.2 Volts
Current 0– 35 mA
Connector 4-pin JST plug female:
1. GND: Ground
2. VCC: Voltage
3. NC: (not connected)
4. SIG: Signal