Instructions

MOTOR SPEED CONTROL VIA PWM

COM-DC-PWM-CTRL

1. GENERAL INFORMATION

Dear customer,

Thank you for purchasing our product. In the following, we will show you

which things should be noted during the use.

Should you encounter any unexpected problems, do not hesitate to

PAGE 1
MOTOR SPEED CONTROL VIA PWM COM-DC-PWM-CTRL 1. GENERAL INFORMATION Dear customer, Thank you for purchasing our product. In the following, we will show you which things should be noted during the use. Should you encounter any unexpected problems, do not hesitate to contact us.
PAGE 2
. USAGE This motor control is designed for DC motors, which have a supply voltage of 6 to 28 V (max. 3 A). - power supply + power supply + motor - motor By turning the potentiometer, the speed of the motor is adjusted by PWM.
PAGE 3
. OTHER INFORMATION PR Our Information and Take-back Obligations according to the Electrical and Electronic Equipment Act (ElektroG) Symbol on Electrial and Electronic Products: This crossed-out bin means that electrical and electronic products do not belong into the household waste. You must hand over your old appliance to a registration place. Before you can hand over the old appliance, you must remove used batteries and replacement batteries which are not enclosed by the device.