Instructions

www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
You have now successfully installed Hyperion on your Raspberry Pi OS.
You can now start Hyperion with the following command:
bin/hyperiond
Now the WebGUI of Hyperion is displayed.
make -j $(nproc)
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release ..
Now you can access Hyperion via web browser. To do so, enter your IP
address of the Pi and attach a :8090. This could look like this, for examp-
le:
192.168.1.100:8090
First you have to set the LEDs in the case. To do this go to Configuration
→ LED Hardware.