Instructions
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
If you want to use the addon, you have to enter the following command
so that Hyperion can be controlled by the addon alone and thus can be
switched o.
systemctl disable hyperion.service --now
You can also undo this with the following command .
systemctl enable hyperion.service --now
Now you can download the addon here or download it directly to the
Raspberry Pi with the following command:
You can install this as already explained. In the addon you can adjust
eects, static color and brightness of the LEDs. You can also switch o
Hyperion again. But in order for the board to take control again, you have
to switch it o and on again manually. More information can be found in
2.3 RGB-LEDs.
wget https://joy-it.net/public/script.module.MCHyperion.zip