User manual

Ausgabe 19.05.2017 Copyright by Joy-IT 8
5 Project examples
5.1 Project 1: „Hello World“
We start with an easy one.
You just need the board and an USB cable to start with the „Hello World!“ project.
This is an communicaon test for your Mega2560 and your computer and a basic project for your rst
steps in the Arduino world.
Aer compleng the drivers installaon, let‘s open the Arduino soware and write some code, which
displays „Hello World“ underneath your code.
Of course you can create some code, which is going to repeat the message automacally.
We can instruct the LED on PIN 13 to blink at rst and to output „Hello World“ aerwars.
Hardware Amount
Mega2560 board 1
USB cable 1
LED 1