Instructions

www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
Lesson 19: Infrared remote control
The IR receiver converts the incoming light signal into a weak electrical
signal. To decode the code of a remote control, it is necessary to know
the coding method. In this project the NEC protocol is used for this
purpose.
For this you need:
1x Mega2560 Platine
1x USB-Kabel
6x M5 LED
6x 220 Ω Widerstand
1x Breadboard
11x Überbrückungskabel
1x Infrarot-Empfänger
1x Infrarot-Fernbedienung