User's Manual

3
◆ Power Plug Installation Instruction & Notes:
1. Insert power plug3 into Holder/Transmitter base 1 and twist gently clockwise to “on”
(on the back of Holder/Transmitter base.) As Figure 6.
Figure 6.
If the car’ s cigarette lighter or the set of Holder/Transmitter base is too low or too close to the
gear shifter, use extension stick2. Insert the extension stick2 into Transmitter1 by twisting
gently clockwise to “on” (on the back of Holder/Transmitter base.) Connect the power plug3
with the extension stick2. As Figure 7.
Figure 7.
2. Insert the power plug3 into the vehicle cigarette lighter adapter outlet (12V). The ”LCD
Digital Display” will show out letters OK as power connects correct.
3. Install the new iPod into the Holder/Transmitter base1. The LED charging indicator will show
out RED light when charging and GREEN light when charging completed.
※ Note: Power Plug3 and extension stick2 can be adjusted up and down to the required
angle and then screw in tightly.
※ Note: The cigarette lighter sleeve4 can be adapted on the power plug 3, when your
cigarette lighter is too big. Refer to Figure 6 or Figure 7.