User's Manual

| 5
4| DLO TRANSPOD FOR IPOD SHUFFLE USER GUIDE
Quick Start
Thanks for buying the DLO TransPod for iPod shuffle. We’ll get you up and run-
ning in 4 easy steps. For more detailed instructions, check out
Using Your DLO
TransPod for iPod shuffle
[pg 6].
1. Tune your car’s FM radio to 88.5.
This is the default broadcast frequency for the TransPod. If 88.5 is not an
empty frequency in your area (i.e. there is music or talk already on that
station), please see
Finding an Empty Frequency [pg 7].
2. Plug your DLO TransPod for iPod shuffle into your auto’s power outlet.
This is the cigarette outlet or the 12v power outlet in any automobile.
3. Turn on your iPod shuffle and plug it into the DLO TransPod
for iPod shuffle.
The shuffle will fit securely into the USB port on the top of the TransPod
for iPod shuffle. For more installation and iPod shuffle positioning options
check out
Optional Accessories [pg 15].
4. Click play and carefully adjust the volume on your iPod shuffle.
IMPORTANT: The TransPod for iPod shuffle is very sensitive to the volume
setting on your iPod shuffle. Adjust the iPod shuffle volume up or down
until the sound is clear without distortion, then l
eave it alone.
You should then use your car stereo’s volume to control your music’s over-
all volume. For more info on optimizing the sound quality of the DLO
TransPod for iPod shuffle, please read
Getting the Best Sounds Quality
with your TransPod for iPod shuffle
[pg 9].
Plug TransPod into Power Outlet
2
Tune to 88.5 FM
1
Click PLAY & Adjust Volume
4
Turn ON and Plug in iPod shuffle
3
Tuning Buttons
Adjus
tment Scr
ew
USB Connector Dock
Fit Collar
LCD Display