User Manual

1
Warnings and precautions
The tip temperature can be > 400°C. Please note; ignoring the
precautions may lead to injury to users or damage the iSolder-40
 Do not touch or change the tip while operating the iSolder-40.
 Do not use the iSolder-40 near flammable items
 Do not use the solder station for any function other than De-
soldering or soldering the electronic/electrical components. (Do
not use it with wood, wax, plastic, etc…)
 Use only tips and parts supplied by JOVY Systems®.
 Make sure that the tip does not touch any object while in
operating mode. It negatively affects the tip sensitivity.
 Use in a well-ventilated work space and preferably use a smoke
absorber appliance.
 Do not use the equipment or the hand piece with wet hands.
 Connect only to properly grounded outlets to prevent risk of
electric shock or equipment malfunction.
 Always place hand-piece back into the holder to prevent
accidental burning of oneself or surrounding objects.
 The iSolder-40 is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities.
As well, persons with lack of experience and knowledge,
unless they have been given supervision or training
concerning use of the soldering station by a person
responsible for their safety. (I recommend removing this quote
or modifying it as it gives the indication that the devide is
complicated and required training, where as following the start
up guide or our video is enough)
Safety precautions:
 Use the protective pad to exchange the tip and do not expose or touch the tip by
your skin.
 Keep a distance from the working space during the rework process, reworking
process might produce unwanted smoke toward your eyes and lungs.