Users Manual
Each physical module can be configured by using the Joué editor software. The
Joué editor allows the tuning of every message sent by the module; such as MIDI
channel, note number, control change, pitch bend range, velocity range.
We provide factory presets for each module that you can use as reference.
To configure a module, create a new preset for this module and configure it.
Once it’s done, s
tore the preset into the module’s memory by simply drag your
preset from the library (or from the main edition window) and dr
op it on the
according module which is placed on top of the Joué board in the device view.
The configuration is stored into the physical internal memory of the module (RFID
tag) allowing for hassle-free swaps during a live performance.
You can have several presets for the s
ame physical module. We recommend you
to organize your workflow by using folders, for instance by song
or project. You
can re-organize the presets list by dragging each item into the list. A preset can
also be duplicated easily for a fast configuration.
To read the physical module configuration which is stored in its memory, click on
the according module on the devices view and read the properties. These
properties cannot be changed (read only).
You can create a new preset out of an existing physical module memory. Simply
drag & drop the module from the edition window to the preset list. It creates a
new preset containing the module configurat
ion.
8