User's Manual

Page - 62 -
When scan is active the scan program screen opens.
Function: Display screen:
Visual method
The signal strength of the selected channel appears on the
signal strength bar.
You can store and delete memory channels for scanning in two ways, do one of the
following:
• Quick method, to be done when scan is not active.
• Visual method, to be done when scan is active.
Quick method:
1. Press the Scan button to deactivate all Scan, DW or TW functions.
2. Navigate to the channel you want to store or delete from the memory.
3. Press and hold Mem for 2 seconds to store or delete the selected channel from
memory.
Visual method:
1. Press and hold the Scan button for 2 seconds to activate Scan.
2. Press and hold the Scan button for 2 seconds again to enter the scan program
screen.