User's Manual

Page - 61 -
1. Press and hold 16 for 2 seconds to enter call channel.
2. Press and hold 16 again to enter the call channel programming screen.
3. Press up/down arrow buttons to select the desired channel.
4. Press and hold Mem until you hear a beep.
The current value updates within approximately 2 seconds.
5. Press Scan to exit the programming mode.
12.10.3 Scan
Function: Display screen:
Scan
All stored channels can be browsed by pressing the Mem
button. Stored channels are displayed with an M.
The channel search indicator is visible on the display,
however, the channels do not appear in real time.
The radio watches a pre-programmed set of 12 channels maximum.
To activate or deactivate Scan, do the following:
1. Press and hold Scan for 2 seconds to activate and short click to deactivate.