User's Manual
Table Of Contents
- 1 List of figures
- 2 Abbreviations
- 3 General
- 4 Standards
- 5 Product description
- 6 Emergency battery and emergency test battery safety instructions
- 7 Rechargeable battery safety instructions
- 8 Functional description
- 9 Technical specifications
- 10 Installation
- 11 Operation instructions (GMDSS radio)
- 12 Operation instructions (Maritime VHF radio)
- 13 Maintenance
- 14 Test and maintenance records
- 15 Channels and frequencies
- 16 Warranty
- 17 Optional accessories
- 18 Spare parts
- 19 Recycling and disposal
- 20 Emergency instructions
Page - 54 -
12.4 Call channel
Function: Display screen:
Call channel
To program a call channel, do the following:
1. Enable triple watch (TW).
2. Press and hold the channel 16 button for 2 seconds to enter the call channel.
The radio will go to the default call channel (Channel 9).
3. Press and hold the channel 16 button again to change the call channel.
4. Press up/down arrow buttons to select the desired channel.
5. Press and hold Mem until you hear a beep to save the channel.
The current value updates within approximately 2 seconds.
The desired call channel is marked with a C that appears on the
radio display.
6. Press the channel 16 button to close the menu.