User's Manual
Manuals
Brands
Jotron Manuals
Electronics
Protective Capsule for S-VDR and EPIRB
21
22
23
24
25
26
27
28
29
30
Table Of Contents
1 GENERAL DESCRIPTION
1.1 EPIRB MODULE
1.1.1 System description
1.1.2 Signal detection
1.1.3 Distress location determination
1.1.4 Added value in the EPIRB
1.1.5 EPIRB registration
1.2 S-VDR SERVER MODULE
2 TECHNICAL SPECIFICATION
3 FUNCTIONAL DESCRIPTION
3.1 GENERAL
3.1.1 Capsule housing
3.1.2 S-VDR Server module
3.1.3 EPIRB module
3.1.4 Battery module
3.1.5 Automatic release bracket, FBR-3
3.1.6 S-VDR Data and Power connections
S-VDR Data and Power connector, capsule
3.1.6.2 S-VDR Data and Power connector, bracket
3.1.7 Wiring table S-VDR Data and Power connection
4 INSTALLATION
4.1 Mounting bracket FBR-3
4.2 Mounting the FBR-3
4.3 Mounting of the Capsule into the FBR-3
4.4 Replacement and mounting of the Hydrostatic Release Mechanism
4.5 Junction box
5 OPERATING INSTRUCTIONS
5.1 FBR-3 Float Free Bracket
5.2 Manual operation of EPIRB module
5.3 Automatic operation of EPIRB module
5.4 Testing the EPIRB module
5.5 Operation of the S-VDR module
5.5.1 Operating software
Change of battery
5.6.1 MSC Circ. 1039
5.6.2 Battery disposal
5.6.2.1 Incineration
5.6.2.2 Land filling
5.6.2.3 Recycling
6 MAINTENANCE AND TROUBLESHOOTING
6.1 EPIRB module / battery module
6.2 Testing EPIRB module
6.2.1 Self-test with sea water contacts activated
6.2.2 Self-test with sea water contacts deactivated
6.3 Maintenance of EPIRB
6.3.1 EPIRB module error messages
6.4 Test of GPS receiver without transmitters activated
6.5 S-VDR module
7 NOTES:
8 SERVICE AGENTS
82310_UM_ SVDR_E 25
4
INSTALLATION
4.1
Mounting bracket FBR-3
The bracket is an automatic release bracket. Not all details are
shown at this picture.
Figure
4.1
, Part of FBR-3 bracket with measures
1
...
...
23
24
25
26
27
...
...
44
