User's Manual

85355_UM_AIS-SART_F

www.jotron.com

4 INSTALLATION

Tron AIS-SART can be mounted several ways, depending on the options avai-

lable. As a general rule, the transponder should be mounted as high as possible

to increase line of sight to the search and rescue units.

Metal objects close to the transponder should be avoided, these will limit the

performance in the directions they are located.

4.1 BRACKETS

There are two different mounting brackets available.

1. Wall bracket

2. Lifeboat bracket

3. Pole bracket

4.1.1 WALL BRACKET

A wall bracket is delivered with the Tron AIS-SART and should be used for sto-

rage of the unit. The bracket should preferably be mounted in a vertical posi-

tion and in a place where the Tron AIS-SART is easily available in case of an

emergency.

Figure 4.1.1a, wall bracket. Figure 4.1.1b, Tron AIS-SART

mounted in wall bracket.

The bracket should be mounted with four screws (Ø 4 mm).