User's Manual

82819_UM_ 40SMkII_E 5
The information in this book has been carefully checked and is believed to
be accurate. However, no responsibility is assumed for inaccuracies.
CAUTION!
This equipment contains CMOS integrated circuits. Observe handling
precautions to avoid static discharges which may damage these devices.
Jotron AS reserves the right to make changes without further notice to any
products or modules described herein to improve reliability, function or
design. Jotron AS does not assume any liability arising out of the application
or use of the described product.
Jotron AS is a prime manufacturer of safety equipment designed for rescue of human lives and
their property. For safety equipment to be effective in line with the design parameters it is
important that they are handled, stowed and maintained in compliance with the manufacturers
instructions. Jotron AS can not be held responsible for any damage caused due to incorrect use of
the equipment or breach of laid down procedures or for failure of any specific component or other
parts of the equipment.
The chapter covering battery replacement (6.1.2) is added for information only. Jotron AS does not
take any responsibility for improper disassembling/assembling of the beacon. We strongly
recommend all service to be done by authorized Jotron AS agents. In addition to normal service,
Jotron AS agents have the necessary equipment and education to test the operational functions of
the beacon. Non-original maintenance and/or service parts may destroy the equipment function and
p
erformance.