Installation Headboard

(1) Headboard*

(2) wings* (2) headboards legs

*images might vary from actual product

headboard components

Assembly Instructions

LIMITED WARRANTY

PLEASE DISPOSE OF PLASTIC BAG (S) AND

CARTON (S) RESPONSIBLY.

LIMITE DE GARANTIA

POR FAVOR TIRAR BOLSA (S) Y CAJA (S)

RESPONSABLEMENTE.

GARANTIE LIMITÉE

headboard & wings hardware

You will need:

• phillips screwdriver

• at head screwdriver

• pliers

*Open all hardware packets

in both packages before

starting assembly.

(20) 1¼” washers

(4) ¼” nuts

(4) 1” x ¼” bolts(8) 3” x 5/16” bolts (4) ⅝” x 5/16” bolts

Headboard

VEUILLEZ JETER LE OU LES SAC(S)

EN PLASTIQUE ET BOÎTE(S) DE FAÇON

RESPONSABLE.

PAGE 1
He adboard Assembly Instructions headboard components (1) Headboard* *images might vary from actual product (2) wings* (2) headboards legs headboard & wings hardware You will need: • phillips screwdriver • flat head screwdriver • pliers (8) 3” x 5/16” bolts *Open all hardware packets in both packages before starting assembly.
PAGE 2
Step 1 1 Attach each wing to headboard using: 1. (1) 3” x 5/16” bolt and (1) 1¼” washer 2. (1) 3” x 5/16” bolts and (1) 1¼” washer 2 3. (1) 3” x 5/16” bolts and (1) 1¼” washer 4. Repeat process for the other wing. 3 Step 2 Insert legs through the holes in the headboard. Make sure that you place the correct leg facing “Out.” Attach each leg to the headboard using (2) ⅝” x 5/16” bolts and (2) 1¼” washers for each leg. Note: Additional hardware included to attach headboard to standard bed frame.