Use Instructions

8
Fig 5. Operating the device
Countdown Operating Stimulus Connection Battery
clock mode strength state level
Fig. 6 Display indicators
2.2 Initiating treatment
Press the Power button to start the treatment process. Once the treatment starts, countdown begins at the
upper-left corner of the screen. Figure 7 illustrates two operating modes: Standby mode and Treatment mode. In
order to avoid sudden unpleasant sensation of stimulation, the initial current should be set to 1.0 mA.
Standby mode Treatment mode
Fig. 7 Operating modes
2.3 Adjusting stimulation strength
Apply a short press to and keys to adjust the stimulation strength.
2.4 Terminating treatment
while in the Treatment mode, press the Power button to terminate the treatment process and enter Standby
mode.
2.5 Turning the device OFF
While in the Treatment or Standby modes, press the Power button and hold for 3 seconds to power off the
Display
Strength Adjustment
Operating keys