Use Instructions

7
Zusanli (ST36) lower Guanyuan (CV4), higher Zhongwan (CV12) Neiguan (PC6)
Fig. 4 Common locations for electrode pad placement
1.6 Holding strap
Based on electrode pad placement, TEA Device can be attached to an arm or leg by using the holding strap. The
strap is first passed through the slit on TEA Device. After connecting the lead cable with electrode pads and setting
stimulation amplitude on the TEA Device, wrap the strap with TEA Device around the arm or leg and adjust the
length of comfort.
1.7 Holding clip
TBD
1.8 TEA app
The keys on TEA Device allow users to perform only basic operations, including starting and stopping treatment
and adjusting the stimulus strength. In order to perform advanced operations, users have to install and use the
companion TEA app on the Android phone.
Chapter 2: Directions For Use
2.1 Preparing the device
Before using this product for treatment, connect the TEA Device to the lead cable with electrode pads and attach
the pads to the skin, as described in 1.6 and confirm that the device is charged. The charging instructions are in
1.3.
2.2 Turning the device ON
To turn the device ON, press the Power button and hold for 3 seconds. TEA Device goes into Standby mode.