Use Instructions

5
Chapter 1: TEA Device and accessories
1.1 List of included parts
Part Name Quantity
TEA Device 1
Lead cable 1
USB charging cable 1
USB power adapter 1
Electrode pads 2
Holding strap 1
Holding clip 1
1.2 TEA Device
As shown on Figure 1, the front of TEA Device has a display and buttons for viewing and setting the device
operations. A magnetic snap connector is located on the back of TEA Device. The interface can be used to connect
the lead cable or the charging cable.
Fig. 1 TEA Device
1.3 USB charging cable
TEA Device is powered using an internal rechargeable lithium polymer battery. Once the device is turned on, the
battery level indicator is located on upper-right corner of the display. When the battery is fully charged, treatment
can be provided for up to 20 hours under normal operating conditions. When the battery is discharged, as can be
seen on the battery level indicator, the USB charging cable should be connected for recharging the battery. For
connecting the USB charging cable, its magnetic snap connector is connected to TEA Device, while its USB
connector is connected to the USB jack of USB power adapter, as shown on Figure 2. Make sure to use the
supplied USB power adapter that is approved for use with the US power lines (120 V, 60 Hz).
Display
Operating buttons
Magnetic snap
connector