Use Instructions

4
• During a stimulation session, do not disconnect the lead cable and electrode pads during stimulation; stop the
stimulation first
• For first time users, skin stimulation can produce an unusual sensation. We recommend that you begin in
• a seated position with low stimulation settings to familiarize yourself with the sensation before progressing to
higher intensities
• Some people with very sensitive skin may experience redness under the pads after the stimulation
session. Generally, this redness is completely harmless and disappears after 15 to 20 minutes. However, avoid
starting a stimulation session on the same area until the redness is no longer visible
• Do not use in environment with strong electromagnetic radiation, such as portable communications
equipment
• Do not use within 1.5 meters of short wave or unshielded microwave devices as this could alter the current
generated by the stimulator.
• Do not apply stimulation near metal. Remove jewelry, body piercings, belt buckles or any other
• removable metallic product or device in the area of stimulation
• Do not apply stimulation near the area of an implant, such as cochlear implants, pacemakers, electrical
• or skeletal anchorage implants
• Do not use in water or in a humid atmosphere (sauna, hydrotherapy, etc.)
• Do not use in an oxygen-rich atmosphere
• Do not use at altitudes of over 3,000 meters
• Sudden temperature changes can cause condensation to build up inside the stimulator. Only use the device
once it has reached ambient temperature
• Do not use while driving, operating machinery or cycling
• Do not apply stimulation while sleeping
• Do not recharge the device when unit is attached to an electrode and/or on your body
• Do not apply electrode pads to the head, face, genitals, neck, both sides of the chest or torso at the same
time
• For long-term storage, batteries should be removed from the device and stored separately
• Replace the drained battery timely to ensure normal use
It is prohibited for users or non-professionals to disassemble or modify the device or accessories
Turn off the device before removing the lead cable or pads
Unplug the USB power adapter from the power socket before using the device
Use only the provided USB power adapter for device charging. Using a different power adapter can be dangerous
It is prohibited to use this device with accessories not supplied by manufacturer