User's Manual

-
Aut
o: The device performs FFC automacally according to
the se
t schedule when switching on the camera.
-
External: Cover the lens cover, then hold
in live view to
c
orrect the non-uniformity of display.
Figure 3-4 Flat Field Correcon
3.
Hold to save the sengs and exit.
3.8 Correct Defecve Pixel
The device can correct the
defecve pixels on the screen which
are not performed as expected.
Steps
1.
Hold
to show the menu.
2.
Select .
3.
pr
ess
to select the
oset. The oset refers to the moving
length of cursor.
4.
Press
or to select the moving direcon.
5.
Press to move the cursor to the posion of dead pixel. Hold
to correct the dead pixel.
Note
If the menu blocks the dead pixel, hold to perform mirror
displa
y.
4 Measure the Distance
The device can detect the distance between the target and the
observaon
posion.
Before You Start
When measuring the distance, keep the hand and the posion
steady. Otherwise, the accuracy may be aected.
Steps
1.
Hold
to show the menu.
2.
Select
and press to go to the seng interface.
1)
Pr
ess
or to select the target from Deer, W
olf, Bear,
and Custom.
2) Set the target height.
7