User's Manual

DOC No: ZB7412-00A-DTS-R03
____________________________________________________________________________________
Copyright © JORJIN TECHNOLOGIES INC. 2017 3
http://WWW.JORJIN.COM.TW
1. OVERVIEW
The certified ZB7412-00 module from JORJIN is a wireless MCU module targeting Bluetooth 4.2 and
Bluetooth 5 low energy applications. This module is based on TI CC2640R2F wireless MCU QFN-32
package chip.
The module is a cost-effective, ultralow power, 2.4-GHz RF devices. Very low active RF and MCU
current and low-power mode current consumption provide excellent battery lifetime and allow for
operation on small coin cell batteries and in energy-harvesting applications.
1.1. General Features
 TI CC2640R2F, 24MHz & 32.768KHz crystals, DC2DC, and chip antenna on a single module.
 Built-in TI CC2640R2F 5x5mm RHB VQFN32 (15 GPIOs)
 LGA 25pins package.
 Dimension 16.9mm(L) x 11mm(W) x 2.45mm(H)
 Powerful ARM® Cortex®-M3 Microcontroller
 Ultra-Low Power Sensor Controller
 Efficient Code Size Architecture, Placing Drivers, TI-RTOS, and Bluetooth® Software in ROM to
Make More Flash Available for the Application
 No external component required.
 Low Power and Wide Supply Voltage Range: 1.8 to 3.8V
- Internal DC-DC converter built-in
 2.4-GHz RF Transceiver and Integrated Antenna.
 Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations
- ETSI EN 300 328 (Europe)
- EN 300 440 Class 2 (Europe)
- FCC CFR47 Part 15 (US)
- ARIB STD-T66 (Japan)
 Tools and Development Environment from TI
- Full-Feature and Low-Cost Development Kits
- Packet Sniffer PC Software
- Sensor Controller Studio
- SmartRF™ Studio
- SmartRF Flash Programmer 2
- IAR Embedded Workbench® for ARM