User's Manual

DOC No: ZB7412-00A-DTS-R03
____________________________________________________________________________________
Copyright © JORJIN TECHNOLOGIES INC. 2017 33
http://WWW.JORJIN.COM.TW
RF test point
There are RF test points in the bottom side of this module. It is only for module production
used. Do not connect any signal to these test points (leave no connection) in the module.
And do not design test point in the main board. Please reserve a clearance in the top-side
copper plane underneath the RF test pads. Do not route any signal or place via in this keep
out area.
Device and Documentation Support
For a complete device and tool documents for the CC2640R2F platform, visit the Texas
Instruments website at http://www.ti.com.
RF test points keep
out area