User's Manual

Doc No: WG6031-00-DTS-D02
Copyright © JORJIN TECHNOLOGIES INC. 2017
http://WWW.JORJIN.COM.TW
CONFIDENTIAL
Page 13
No.
Item
Temperature (°C)
Time (sec)
1
Pre-heat
D1: 140 ~ D2: 200
T1: 80 ~ 120
2
Soldering
D2: = 220
T2: 60 ± 10
3
Peak-Temp.
D3: 250 °C max
Note: (1) Reflow soldering is recommended two times maximum.
(1) Add Nitrogen while Reflow process： SMT solder ability will be better.
 Stencil thickness： 0.1~ 0.15 mm (Recommended)
 Soldering paste (without Pb)： Recommended SENJU N705-GRN3360-K2-V can get better
soldering effects.