User's Manual

Doc No: WG1300-00 EM Board-UG-D01

http://WWW.JORJIN.COM.TW

CONFIDENTIAL

Page 5

Battery voltages’, R14 can be remove to

support such a case.

VBAT_IN

Battery voltage input to Module. For

MSP430 Host platform, VIO_HOST=VBAT_IN.

For other platforms which have different

voltage levels from Battery voltages’, R14

can be remove to support such a case.

10 GND Ground

EXT_32KHz

External Slow Clock input from Host

device. It can be used for the SiP Module

inside which hasn’t slow clock source.

Table 3. TOP-Side J5 of WG1300-00 EM Board

2.2. BOTTOM Side

Figure 2 is BOTTOM-Side picture of WG1300-00 EM Board.

Figure 2. Bottom Side of WG1300-00 EM Board

There are two EM Board mating connectors which are used for

connecting to Host platform and are mounted on the bottom side as

the picture above. Table 4 and Table 5 show the descriptions on the

J6 J7