User's Manual

28
Setting
You can make settings from the MOVERIO BT-200 web browser or on your
computer.
1. Hold down the Wireless/Pass-Thru button and the Wireless Connect
button at the same time for at least ve seconds.
The unit enters setup mode and the IP address for the unit is displayed on the
device connected to the HDMI Output.
The Wireless Ready and Link indicators ash at the same time.
2. Enter the displayed IP address in the URL bar on your browser.
The setup screen is displayed.
3. Make the necessary settings.
Item Function
Setting Select on or o as the power saving setting.
Firmware Update
Update the rmware for the unit. Check the lat-
est rmware at http://www.epson.com
Factory Reset Reset all settings to the original settings.