Troubleshooting Guide

Q5. If want to connect to the Camera/printer,please use the Bridge mode.
Please follow these steps.
✔Step 1：Plug in, switch "ON" button on the side, the lights will all light up.
✔Step 2
：
Wait about 60s, connect WiFi “JOOWIN_G” or “JOOWIN_5G”.
✔Step 3
：
Log in IP "192.168.10.1" on the browser , enter the password "admin", Click
“SET PASSWORD” .
✔Step 4：Click “Setting" pattern on upper right corner, then click Bridge mode.
✔Step 5
：
Scan and select your WiFi,Turn on“Combine wifi” , Enter your WiFi password
(Pre-Shared Key), click “Save Setting”
✔Step 6
：
Completed setting, reconnect new WiFi “XXX-2G&5G
If any questions,please feel free to contact us via [e-mail]