User Manual

ManualsBrandsJOOM ManualsOtherJOOM 3056 Four-Way Remote Control Car

Four-Way Remote Control Car Manual

Remote control car battery installation and removal

1. Unscrew the battery cover screw with a screwdriver and remove the remote

control car battery cover

2. According to the positive and negative symbols of the battery box,

install 3 1.2VAA batteries according to the correct polarity

3. Cover the battery cover of the remote control car and then screw the

screws of the battery cover back to the original place.

Remote control battery installation and removal

1. Unscrew the battery cover screw with a screwdriver and remove the

remote control battery cover

2. Press the positive and negative symbols of the battery box, and install

2pcs 15VAAA batteries according to the correct polarity. After closing

the remote control battery cover, screw the screws of the battery cover

back to the original place.

Operation Method and Performance

•

Operation Method:

1. Turn on the remote control car and the remote control switch, the

automatic code matching is successful

2. Put the remote control car on a flat ground

3. The specific operations are as follows:

A: Press "forward" on the remote control, the remote control car will

drive forward

B: Press "Back" on the remote control, the remote control car will drive

backward

C: Press "forward + turn left" on the remote control, the remote control

car will move forward and turn left

D: Press "forward + turn right" on the remote control, the remote control

car will move forward and turn right

E: Press "back + turn left" on the remote control, the remote control

car will turn backward and turn to the left

F: Press "back + turn right" on the remote control, the remote control

car will turn back and turn to the right

Summary of content (7 pages)

PAGE 1
Four-Way Remote Control Car Manual Remote control car battery installation and removal 1. Unscrew the battery cover screw with a screwdriver and remove the remote control car battery cover 2. According to the positive and negative symbols of the battery box, install 3 1.2VAA batteries according to the correct polarity 3. Cover the battery cover of the remote control car and then screw the screws of the battery cover back to the original place.
PAGE 2
•Operational Performance: A: All-round action: forward, backward, turn left, turn right, stop B: Remote control distance: 15 meters •Function description of fine-tuning operation: 1: When pressing the front or back button of the remote control, when the normal driving direction of the remote control car is to the right, the "fine adjustment" pointer at the bottom of the remote control car can be adjusted to the "L" direction 2：When pressing the front or back button of the remote control, when the normal dri
PAGE 3
Remote Control Car Battery Installation and Removal 1. Use a screwdriver to unscrew the battery door screw and remove the remote control battery door 2. Install 3 1.2VAA batteries according to the correct polarity of the positive and negative symbols of the battery box 3.
PAGE 4
Matters Needing Attention 1. If you do not use it for a long time, please push the switch to the "OFF" position. If you store it for a long time, please take out the battery to avoid damage to the product due to battery leakage. 2. Discarding the toy at will, it may have an impact on the environment, please properly recycle it 3. The user should check the wires, plugs, enclosures and related parts. If there is any damage, they must stop using them until they are in good condition. 4.
PAGE 5
To Consumers 1. When playing the remote control car indoors, be careful not to damage the furniture and glass; 2. Please do not play with remote control cars on roads and crowds to avoid danger, please play in a safe place; 3. When you play a remote control car outdoors, you should stop playing immediately when you hear thunder; 4. Do not play on the water or on the sand to avoid electronic failure; 5.
PAGE 6
About Frequency and Venue 1. If there are cars with the same frequency crashing nearby at the same time, the control of the remote control car may fail; 2. If it is interfered by other radio waves, the control will also fail. Please change the play place or time; Product packaging pictures may be different from the actual product, please refer to the actual product. The packaging and instructions contain important information, please keep it.
PAGE 7
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.