Manual
Table Of Contents
- INTRODUCTION
- SYMBOLS AND DECALS
- SAFETY
- CONTROLS
- OPERATION
- MAINTENANCE
- LUBRICATION
- TROUBLESHOOTING
- STORAGE
- SCHEMATIC
- TECHNICAL DATA
- SERVICE JOURNAL
- INTRODUCCIÓN
- SÍMBOLOS Y RÓTULOS
- SEGURIDAD
- CONTROLES
- Palancas de control de la dirección
- Freno de estacionamiento
- Control del acelerador
- Interruptor de la cuchilla
- Estrangulador
- Interruptor de arranque
- Medidor de servicio
- Palanca de ajuste del asiento
- Fusible
- Ajuste de la altura de corte
- Válvula de corte de combustible
- Palancas de liberación hidrostática
- Botón de seguimiento
- Depósito de combustible
- OPERACIÓN
- MANTENIMIENTO
- LUBRICACIÓN
- SOLUCIÓN DE PROBLEMAS
- ALMACENAMIENTO
- ESQUEMA
- DATA TÉCNICOS
- REGISTRO DE SERVICIO
ENGINE
Manufacturer Briggs & Stratton
Type 44T877 Commerical Turf
Power
24 hp
1)
Lubrication Pressure with oil lter
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 3-1/2 gallons 13,25 litres
Cooling Air cooled
Air lter Cyclonic
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
TRANSMISSION
Transmission Hydrostatic transaxles
Steering control Dual levers, foam gripped
Speed forward 0-6.5 mph 0-10,5 km/h
Speed reverse 0-3.5 mph 0-5,6 km/h
Brakes Mechanical
Front caster tires 11 x 6-5
Rear tires, turf pneumatic 18 x 9.5-8
Tire pressure 15 PSI / 103 kPa / 1 bar
FRAME
Cutting Width 54" 137,2 cm
Cutting Height 1-1/2 - 4" 3,8 - 10,2 cm
Number of Blades 3
Blade Length 18-1/4" 46,4 cm
Anti-scalp Rollers 4 Adjustable
Seat Standard
Hinged Arm Rests Optional
Service Meter Digital
Blade Engagement Ogura Electromagnetic Clutch
Deck Construction Stamped
Productivity 2.8 acres/h
13,331 m
2
/h
DIMENSIONS
Weight 640 lbs 290 kg
Base Machine Length 75" 190,5 cm
Base Machine Height 40" 101,6 cm
Base Machine Width 44" 111,8 cm
Overall Width, Chute Up 57" 144,8 cm
Overall Width, Chute Down
68" 172,8 cm
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.
31
TECHNICAL DATA