Instructions / Assembly

1.
2.
Illuminate the LED.
Shade the Light.
3.
4.
Rotate and Lock.
Brighten Your World!
Get ready to brighten up your space!
First, install the LED bulb into the socket by
gently twisting it until it’s snug. Make sure
not to over-tighten it or you might break
the bulb.
Now that your LED is securely in
place, it’s time to add the shade.
Simply slide it over the base and let
it rest comfortably around the bulb.
Make sure the tabs on the shade
align with the slots on the base.
Don’t worry if it’s a little crooked
at rst - we’ll x that in the next
step.
This is where the magic happens!
Rotate the shade clockwise until
you feel it snap into place. That
means it’s securely locked and
won’t wobble or fall o. If it’s not
straight, you can adjust it until it’s
just right.
Congratulations, you’re done!
You’ve successfully installed your
light bulb into your new lamp.
Flip the switch and bask in the
glow of your newly illuminated
space!
WARNING
FOR USE WITH LED BULBS ONLY!
Incandescent bulbs may cause
melting, bodily injury, re or
death. Keep out of reach
from children.
NOTE:
When it comes time to replace
your bulb, use a dimmable E26
LED 4W bulb.