Instructions / Assembly

13
Use of intelligent remote control
Pairing JONATHAN Y Mobile APP
Scan the QR code to download the "JONATHAN Y " APP
a. Download and Open "JONATHAN Y" Mobile App.
b. Turn on the electric power.
c. The app pairing: please long press the key immediately till you hear the
long “beep” sound, And then, entre the wifi_pair status(Intellectual product).
d. Press the + button in the top right corner of the mobile App.
e. Under "Add Manually" select Home Appliances.
f. Select Fan.
g. Click "Confirm indicator rapidly blink" and type in your Wi-Fi name &
password then proceed to click "OK".
h. After the loading screen go back to homepage and you should be able to
find your device there.
Q : If you cannot pair the JONATHAN Y APP
A :
1 . Please check whether the WI-FI network is 2.4g.
2. Turn off the power and turn on the power again, wait for 10 seconds, then press
and hold " " at the same time until the receiver emits a prolonged
beep sound three times.
3. Pairing JONATHAN Y Mobile APP again.
Q : If you remote cannot control the receiver.
A :
1. Please turn off the power.
2. Turn on the power again.
3. Press and hold " " at the same time. Until the receiver emits "beep" three times.