Instructions / Assembly

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20 minutes.

1.Separate the Mounting Plate(B) from the Lamp Body(D) by removing the Canopy Nut(E) anti-clockwise.

2.Fix the Mounting Plate(B) to the wall,

a)For wooden material: Attach the Mounting Plate(B) to the outlet box by using Mounting Screw(C) with screwdriver.

b) For cement and drywall materials:Hold the Mounting Plate(B) to the outlet box and mark the holes on the wall surface

for drilling.Remove the Mounting Plate(B),drill 2 holes,thread the Anchor(A) into the holes,then attach the Mounting

Plate(B) to the outlet box, secure the Mounting Screws (C) through the set holes into the Anchor(A).

3.Attach the Canopy of the Lamp Body(D) to the Mounting Plate (B) and fix it by turning the Canopy

Nut (E) clockwise.

4. Insert the Bulb (F) into the Socket. Be sure to use light bulb(F) with wattage no greater than

specified on this fixture. Make sure that electrical current is turned off before changing bulbs.

PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT

THERE IS 1 X 4W LED BULB IN THE BOX.

ENJOY YOUR LAMP

2/2