Instructions / Assembly

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
1.Unscrew the Socket Ring(G) from the socket.
2.Place the Shade Holder(F) onto the socket and fix it by turning the Socket Ring(G) clockwise till tight.
3.Press the Shade Holder(F) inward and insert it into the interiror of Feather Shade(I).
4.Separate the Mounting Plate(A) from the Lamp Body(D) by removing the Canopy Nut(E) anti-clockwise.
5.Attach the Mounting Plate (A) onto the J-box and secure it by turning 2 Mounting Screws (C)
clockwise till tight.
Connect, Hot, Black or Red Outlet Supply Wire to:
Connect, Neutral, White Outlet Supply Wire to:
Black
White
* Parallel Cord (round & smooth)
* Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored
stripes)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor
Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped
and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw on mounting bracket. Tighten ground screw.
6.Attach the Canopy of the Lamp Body(D) to the Mounting Plate (A) and fix it by turning the Canopy
Nut (E) clockwise.
7. Insert the bulb (H) into the Socket as diagram. Be sure to use light bulb(H) with wattage no greater
than specified on this fixture. Make sure that electrical current is turned off before changing bulbs.
PLEASUE USE TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9- WATT
THERE IS 1 X 9W LED BULB IN THE BOX.
ENJOY YOUR LAMP
E
G
H
B
C
F
I
A
D
PIECE
DESCRIPTION
PICTURE
QUANTITY
A
B
E
3X
1X
2X
1X
2X
PIECE
DESCRIPTION
PICTURE
QUANTITY
F
1X
1X
1X
G
Mounting Screw
Bulb
Wire Nut
Canopy Nut
Socket Ring
1X
I
Mounting Plate
C
D
H
Feather Shade
Lamp Body
Shade Holder
2/2