Instructions / Assembly

Step 1 Step 2 Step 3

Make sure all parts could be aligned before assemble Insert the bottom nipple of the Shade(B) into the Insert the bulb(D) into the socket.

Do not rotate lamp body too hard avoid base screw broken Short Tube(C) and rotate it till tight. Put the light on a level surface to check

Insert the Long Tube(F) into the Base(G) and rotate it till tight. Place the Cap(A) onto the Shade(B) and rotate it if everything is stable.

Insert the Socket Assembly (E) into the Long Tube(F). clockwise till tight.

Insert the Short Tube(C) into the Socket Assembly (E) and

rotate it till tight.

Be careful not to twist the power cord and tighten securely

PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT

THERE ARE 2 X 4W LED BULBS IN THE BOX.

ENJOY YOUR LAMP

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware

contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 6 minutes.