Instructions / Assembly

Step 1 Step 2 Step 3
Make sure all parts could be aligned before assemble Hang each Crystal Ball(G) onto the Shade Frame. Put the light on a level surface to check
Do not rotate lamp body too hard avoid base screw broken Insert the bulbs(H) into the sockets. if everything is stable.
Screw the Tube w/t teeth (C) onto the Base (D).
Screw the Tube w/ teeth (B) onto the Tube w/t teeth (C).
Screw the Tube w/ teeth (B) onto the Tube w/ teeth (B).
Screw the Socket Assembly (A) onto the Tube w/ teeth (B)
Place the Shade Frame(F) over the Socket Assembly(A)
with Final(E).
Be careful not to twist the power cord and tighten securely
PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT
THERE ARE 3 X 4W LED BULBS IN THE BOX.
ENJOY YOUR LAMP
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
1
2
3
A
B
C
B
D
E
F
H
G