Instructions / Assembly

Make wire connections, with wire connectors(T), following the reference chart listed below.
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Grounding Instructions:
*Parallel Cord(square&ridged)
Step 6
Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to:
a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on
mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground
Clear,Brown,Gold or Black without Tracer(colored stripes) Clear,Brwn,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)with copper metal conductor Insulated Wire(not green)with Silver metal conductor
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
Black White
*Parallel Cord(round&smooth)
3/3
Step 7
Step 8
mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground
wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding
screw on mounting bracket. Tighten ground screw.
Fixed the canopy(I) with mounting bracket(O)by
screwed ball(J).
Install bulb(L). Be sure to use light bulb(s) with
wattage no greater than specified on this fixture.
Always make sure that electrical current is turned off
before changing bulbs.
PLEASE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB
MAX 9-WATT
THERE ARE 6PCS LED 4 WATT BULB IN THE BOX
ENJOY YOUR LAMP
3/3