Instructions / Assembly

Step 1 Step 2
Step 3 Step 4
PREPARATION
Unlock the flat cross screw (D) from the conical frame (A) and the
rectangular frame (C）by using screwdriver
Fixed Conical frame(A) and Rectangular frame(C) with Frame support rod (B) by Flat head
Phillips screw(D)
Pass the wire through the hang rod(G), fix it on lamp holder(H) by clockwise
2/3
Step 5
Install the mounting bracket(Q) to the junction box with machine screw (P).
Pass the wire through the hang rod(G), fix it on lamp holder(H) by clockwise
rotation. Then continue to pass the wire through top frame, rubber gasket(F)
and loop(E). Rotated loop(E) by clockwise to fix lamp holder(H) and lamp body
frame.
Used Chain(K) to connect the canopy (I) with lamp body ,then pass the wire through Chain(K)
to canopy(I).
2/3