Instructions / Assembly

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
1. Fix the crystal(K,L,M,N) on the lamp body(O) by screw(P)
2. Fix the mounting bracket(C) to the outlet box with machine screw(D).
3. Insert the plastic gecko(A)into the hole of ceiling, and fix the mounting bracket(C)to the ceiling
with screw(E).
Connect, Hot, Black or Red Outlet Supply Wire to:
Connect, Neutral, White Outlet Supply Wire to:
Black
White
* Parallel Cord (round & smooth)
* Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer
(colored stripes)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor
Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped
and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green ground
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
5. Use regulator (I) to adjust long of wire, pull the wire into regulator(G) to make the wire shorter,
then secure it with the mounting screw (B).
7. Turn on switch, light up.
ENJOY YOUR LAMP
2/2