Instructions / Assembly

1. Attach the mounting bracket (A) to the junction box with machine screw (C).
2.Attach the collar loop (E) to the mounting bracket (A).
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped
and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green
Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor.
Black White
* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
Connect, Hot, Black or Red Outlet Supply Wire to: Connect, Neutral, White Outlet Supply Wire to:
2/2
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw(B) on mounting bracket, no less than 2" from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw on mounting bracket. Tighten ground screw.
adjust them to be an appropriate gap.
PLEASE USE TYPE"B" BULB H MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-
WATT， THERE ARE 4PCS LED 4-WATT BULBS IN THE BOX
ENJOY YOUR LAMP
4. Attach the metal unit (L) to the fixture body (J), secure with ball nut (K), unfold the metal bar and
5. Connect the wire with wire connector (D).
6. Thread the chain (H) through the canopy ring (G) and canopy (F), then lock it to the collar loop
(E) and the fixture loop (I) by using the chain links.
7. Attach the collar loop (E) to the canopy (F) with canopy ring (G).
8. Place the candle sleeves (N) to the socket, then install the bulb (M) to the socket.
3. Attach the fixture loop (I) to the fixture body (J).
2/2