Installation Guide

Step 1 Step 2 Step 3

Insert the Harp (D) into the Saddle (B). Pinch the clip from base Put the light on a level surface to check

Put the shade(E) on the Harp(D), then Replace with 7W bulb(bulb included) if everything is stable.

tighten the Finial (F)into the Harp (D) Put the clip back carefully and not twist the cord

Insert the bulb(G) into the socket(C).

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware

contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 6 minutes.

PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT

THERE IS LED 9-WATT BULB IN THE BOX

ENJOY YOUR LAMP

PREPARATION