Instructions / Assembly

Option 1: Portable lamp with plug

Step 1

Ste

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents

list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20 minutes.

1. Three tubes (J) were locked on the NIPPLE of IAMP BODY (F) from the bottom.

2. Place the MOUNTING PLATE(B) on the wall and mark the wall according to the MOUNTING hole and place

2 PLASTIC ANCHORS(C) on the wall.

ENJOY YOUR LAMP

3. Use 2PCS TAPPING SCREW (C) to mount the MOUNTING PLATE (B) on PLASTIC ANCHORS (A).

Attach the IAMP BODY (F) to the MOUNTING PLATE (B) and secure it with the MOUNTING SCREW (E).

1. Place the shade (G) on the lamp body (F), and then lock the shade (G) with the socket ring (H) .

2. Lock the bulb (I) to the socket .

3.Move handle to adjust the direction of lamp shade (G).

PLEASE USE TYPE"A" BULB MAX 25-WATT OR LED BULB MAX 5-WATT, THERE IS 1PC LED

4-WATT BULB IN THE BOX.

BCD

2/3